Control Panel Operation - 39-D 250; Accudrill™ Technology - Walter ICECUT 250 Manuel D'instructions

Icecut 250 & Icecut 250P
7A) CONTROL PANEL OPERATION
ACCUDRILL™ Technology
Green Zone
Yellow Zone
Perfect, try to keep in
A little too much
the green zone for
pressure on the drill,
the best cut and
ease off to get back
optimum machine
to the green zone.
performance.
Original Instructions
ICECUT 250 (39-D 250)
Designed for you to get the most out of your machine
and your cutters. ACCUDRILL has an easy to read panel
that indicates when you are drilling with too much force,
which will damage the machine and the cutters.
Allow the cutter to do the work and you will find that a
much smoother hole and faster drilling time is achieved.
Red Zone
Overload: Back off
immediately as too
much force will cause
the motor to cut off if
you continue.
10
ACCUDRILL™ Technology
12-2018