Fuse Replacement (For Electric Starting Model) - Yamaha MZ300 Manuel D'utilisation

1
1
Fuse replacement
(For electric starting model)
Be sure to use specified fuse. A wrong fuse will
cause electrical system damage and A FIRE
HAZARD.
NOTICE
Be sure the engine switch is turned to "5" to pre-
vent accidental short circuiting.
1. Remove the screws 1 and the cover 2.
2
779-041
2. Replace the blown fuse with one of proper amper-
age.
3 Fuse
3 Specified fuse: 10 A
779-042
TIP
If the fuse immediately blows again, consult a Yamaha
dealer.
3. Install the cover, and then tighten the screws.
WARNING
– 27 –