To turn on keylock, press Func+
press Func+
Note: Using keylock does not prevent the scanner from scanning
channels.
Backlight
Pressing
turns the display light on and off. It remains on for 15
seconds and then turn off automatically.
PC Programming
Connect your scanner to your PC through the USB cable to:
Program channels into the scanner
Set any setting
When you connect your scanner to your PC, a series of screens will
appear to assist you.
USB drivers and optional programming software are available for
download from www.service.alan-electronics.de
again.
no longer displays.
.
appears. To turn off keylock,
English
73