Installation; Hardware Installation; Windows 98 Se Driver Installation - Belkin F5U513 Mode D'emploi

Les langues disponibles

Installation

1. Examine your laptop computer and locate the CardBus slot(s).

2. Insert the Adapter into a free 32-bit Type II CardBus slot.

3. Apply power to the laptop and let Windows start normally.

1. When Windows has finished loading, the "New Hardware Wizard" will

launch and display a window that identifies the Adapter as a "Texas

Instruments OHCI Compliant IEEE 1394 Host Controller". Click "Next".

2. Select "Search for the Best Driver for Your Device (Recommended)". Click

"Next".

3. Leave all boxes unchecked. Click "Next".

4. The "New Hardware Wizard" will now prompt you to select the driver you

wish to install. Select "The Updated Driver (Recommended)". Click "Next".

5. The "New Hardware Wizard" will now locate and install the proper driver.

Click "Next".

6. You may be prompted to insert your Windows 98 installation CD.

7. Hardware installation is now complete. Click "Finish".

8. To confirm that the Adapter has been properly installed, open the Windows

"System Properties" window and click the "Device Manager" tab. In the

list of installed devices, click the "+" sign next to the entry for "IEEE 1394

Bus Controller". You should find an entry for "Texas Instruments OHCI

Compliant IEEE 1394 Host Controller".

Table des Matières