Driver Installation - Belkin FireWire 800 ExpressCard Manuel De L'utilisateur

Driver Installation

1. Insert the FireWire 800 ExpressCard Adapter installation
1
CD into your CD-ROM drive. After a few moments, the
main menu automatically starts. Note: If the main CD does
not begin automatically, click the "Start" button and select
2
"Run". From the "Run" dialog box, enter "<drive>:\setup_
xp2.exe" and click "OK" (where "<drive>" represents the
driver letter that identifies your CD-ROM drive under "My
3
Computer"—e.g., if the CD is in drive D, enter "D:\setup_
xp2.exe").
4
2. Locate your notebook's ExpressCard slot(s). With your
notebook on, slide the ExpressCard Adapter into the
unused 34mm or 54mm ExpressCard slot.
5
Note: Do not plug any devices into the ExpressCard
Adapter until you have completely finished the
driver installation.
3. Select "FireWire 800 Driver". The Software Installation
Wizard appears and begins to download the drivers. If
the following "Software Installation" prompt appears, click
"Continue Anyway" to complete the installation process.
4 4