Bestron AS1500R Mode D'emploi page 26

operAtion
1. Rotate the hose connector into the hose opening on the motor unit to the right (see Figure 2). To
remove the hose, rotate the connector to the left and pull the connector from the hose opening.
A B
2. Slide the telescopic tubes onto the hose handle, see Figure 3A.
3. Press the button on the telescopic tubes and keep it pressed in; you can then extend or retract the
tubes to the required length. See Figure 3B.
4. Press the foot button on the nozzle to set the combi nozzle for use on hard or soft surfaces, see Figure
4. For use on hard surfaces, press the foot button on the combi nozzle to extend the brushes. Lift the
button for use on soft surfaces.
5. The power cord has a yellow and red mark, see Figure 5. Pull out the cord to the yellow mark.
Never pull out the power cord beyond the red mark. This could damage the power cord.
6. Put the plug in the wall socket, and press the On/Off switch. To switch off the appliance, press the On/
Off switch again, see Figure 6.
Figure 2
Fitting the hose to the vacuum cleaner
Figure 3
Fitting the parts together
Figure 4
Soft and hard surfaces
Figure 5
Markings on the power cord
26
user's instructions