Adjusting The Tilt Angle; Ordering Replacement Parts; Disposal And Recycling - EINHELL BT-SH 90/350 Mode D'emploi

Anleitung_BT_SH_90_350_SPK7:_
GB

9.2.2 Adjusting the tilt angle

Check the tilt angle of the motor (5) before using the
equipment for the first time and at regular angles
thereafter. To do this, place a stop angle between
the base plate (1) and the motor holder (6) and
check whether the pointers (B) on the scales (13)
display 0° (Fig. 23). If this is not the case, undo the
retaining nuts on the pointers (B) and adjust them.

9.3 Ordering replacement parts:

Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info

10. Disposal and recycling

The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
18
21.09.2009 9:20 Uhr Seite 18