Clamper - Panasonic TY-CE42PS20 Mode D'emploi

Fitting procedure
9. Gather the cables
• For details on wiring, see the instruction manual of the plasma display.
• Bundle the cords and cables connected to the terminals at the bottom of the back side of the plasma display, and
secure them using the two clampers
• Do not bunch the power cord together with other cords and cables.
Cable
Removing the plasma display
• Return the ceiling unit angle to 0º, then remove the two
screws for securing unit
the ceiling unit.
Lift the lower part of the plasma display,
pull outward
and lift upward.
18
.

Clamper

on the left and right sides of
Clamper
Cable
Screw for securing unit
(M5-35)
③
①
Insulation spacer
②