Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Quick Start Guide
Intended use
The chambers are suitable for exact tempering of harmless materials and for drying and heat treatment of solid or
pulverized charging material, as well as bulk material, using the supply of heat. They can be used to dry e.g.
glassware, and for
warm storage of liquids in
The incubators BD and BF are especially useful for incubation of cultures at a standard temperature of 37 °C /
98.6 °F.
A solvent content must not be explosive or flammable. A mixture of any component of the charging material with air
must NOT be explosive. The operating temperature must lie below the flash point or below the sublimation point of
the charging material. Any component of the charging material must NOT be able to release toxic gases. Other
applications are NOT approved.
Details can be found in the operating manual in chapter 1.6.
You may not make any modifications to the device yourself, as these may limit proper usage.
The chamber must only be operated using only original BINDER accessories or accessories / com-
ponents from third-party suppliers authorized by BINDER. The user is responsible for any risk arising
from using unauthorized accessories
BINDER GmbH is responsible for the safety features of the chamber only, provided skilled electri-
cians or qualified personnel authorized by BINDER perform all maintenance and repair, and if com-
ponents relating to chamber safety are replaced in the event of failure with original spare parts. The
user is responsible for any risks arising from using unauthorized accessories/components.
Components
Front view
Triangular instrument panel
Controller display and functional buttons
Rack
Glass door handle (BD and BF)
containers.
Outer door
Door handle
Glass door (BD and BF)
BD / BF / ED / FD / FED (E3)
Front view with open door
Page 3
Publicité
Table des Matières
