LF Master Forge BG1795BAL Mode D'emploi page 29

OPERATING INSTRUCTIONS
If ignition does not take place within 5 seconds, immediately
turn the control knob to the OFF position. Wait 5 minutes and
repeat step 4 above or refer to match lighting instructions in
manual.
If the igniter does not function, the burner can be lit by
holding a lit match to the burner while the control knob is
turned counter-clockwise to "HIGH."
NOTE: After the first use the stainless steel around the
burner will darken. This is a normal reaction of premium
Rotisserie Burner Control Knob
stainless steel due to heat and is not a defect. The
infrared panel will also darken after initial use. This is
also a normal occurrence.
USING THE GRILL LIGHT
Light Operation Instruction
1. Make sure light's power switch on the control panel is
in the "OFF" position.
2. Connect power plug to properly grounded outlet.
3. Turn the light's power switch to "ON."
!
WARNING
Keep any electrical supply cord away from any heated surface.
Do not turn on the lights when the hood is closed.
29