Tips For Extending The Life Of Your Pressure Washer; Maintenance Schedule; Technical And Consumer - Campbell Hausfeld/Scott Fetzer CP5211 Mode D'emploi

Operating Instructions and Parts Manual
Operation (Continued)
6. Disconnect the high pressure hose from the gun and drain the hose. Hold the gun
and lance in a vertical position and squeeze the trigger to drain the water out.

tIPs For extendIng the lIFe oF your Pressure WAsher

1. Never operate the unit without water.
2. Your pressure washer is not meant to pump hot water. Never connect your pressure
washer to a hot water supply as it will significantly reduce the life of the pump.
3. Running the unit for more than one minute without spraying water causes heat to
build up in the pump. Running the unit without spraying water can damage pump
components.
Maintenance
Observe regular maintenance intervals to ensure maximum performance and life
from the pressure washer. Refer to the schedule for recommended maintenance. If you
operate the pressure washer in dusty conditions, perform maintenance checks more
often.

MAIntenAnCe sChedule

Maintenance Schedule
Daily
teChnICAl And ConsuMer InForMAtIon
Horizontal Oriented Pressure Washers
Pump Oil Capacity
ARXJV
2DX and 3DNX
Pump Detergent Suction
Water to detergent ratio
Water Supply Requirements
Minimum inlet pressure
Maximum inlet pressure
Maximum inlet temperature
Minimum inlet flow rate
Inlet garden hose size
Maximum inlet garden hose length
14
www.chpower.com
Action needed
Check water inlet screen and filter.
4.5 fl. oz. AR64545 oil
8.5 fl. oz. CAT pump oil
10 to 1 (10% detergent)
20 psi
100 psi
100˚ F
5 gpm
5/8 in. I.D.
50 ft