Assembly And Preoperation - Campbell Hausfeld/Scott Fetzer CP5211 Mode D'emploi

Operating Instructions and Parts Manual

Assembly and Preoperation

AsseMbly And PreoPerAtIon
1. Slide the handle assembly over the
lower legs of the cart base. Use the
(supplied) star knob and bolts to
secure the handle to the legs (See
Figure 9).
2. Slide clear plastic detergent hose onto
brass hose barb (See Figure 10).
3. Insert quick connect spray tips into
rubber holders on front of the placard.
(See Figure 11).
4. Secure garden hose (not included) to
the inlet connection on pump (See
Figure 12).
5. Connect the high pressure hose to the
pump outlet (See Figure 13).
6. Attach the lance to the gun (See Figure
14).
7. Install quick connect tip (See Figure
15).
10
www.chpower.com
Figure 9 - Assemble handle
Figure 11 - Insert spray tips into the holder
Figure 14 - Attach lance to gun
Hose
Barb
Pump Outlet
Pump Inlet
Thermal
Garden
Relief Valve
Hose
Figure 12 - Pump hook up
Figure 10 - Attach suction tube to barb
fitting
Figure 13 - Connect high pressure hose to
pump
Figure 15 - Quick connect tip
Detergent Hose /
Chemical Tube