Turning On/Off The Unit; Turning Off The Unit; Enabling Use With The Nsr-1000 Series - Sony IPELA NSRE-S200 Manuel D'installation

Turning On/Off the Unit

When you connect the power to the power outlet, the
unit will turn on. After the unit turn off once, pressing
the power switch on the front or rear of the unit, the unit
will turn on.
Wait until the NSRE-S200 has turned on before turning
on NSR-1000 series.
Caution
Take the inrush current into consideration when
configuring power connections for systems that include
multiple NSR-1000 series or an NSRE-S200 unit. For
details on the inrush current, see "Reference Data for
Installation" (page 8).
Front power switch
POWER
Rear power switch
The power LED on the front panel is lit green when the
unit is turned on.
Note
The fan noise may be loud for about 15 seconds after
turning on the unit. This is not a malfunction.

Turning Off the Unit

Perform the following to turn off the unit.
1
Shut down this unit and the NSR-1000 series to
which it is connected.
2
Press the power switch on the rear panel of the unit
in the 1 position for at least 5 seconds.
The unit turns off.
NETWORK HDD 1 2 3 4 STATUS 1 2 3 4 ERROR
Enabling Use with the
NSR-1000 Series
Refer to the Installation Manual for the NSR-1000
series, and configure the required settings.
Turning On/Off the Unit / Enabling Use with the NSR-1000 Series
13