Hendi 221044 Mode D'emploi page 5

• Switch off the appliance and disconnect from the supply before changing acces-
sories/parts or approaching parts that move in use.
• Do not continuously operate the appliance for too long to avoid overheating the
motor. The continuous operation time should not exceed 10 minutes. Let the ap-
pliance cool down if the appliance housing becomes too hot. Only operate the
appliance again, after it has cooled.
• Keep fingers, hair, clothing and utensils away from all moving parts.
• Dry the appliance and all accessories/parts before connecting to the power supply
and prior to attaching the accessories.
• Never use your fingers or an object (e.g. spatula) to push ingredients down the
feed tube while the appliance is running. Only use the pusher for this purpose.
• Never use a spoon, a spatula or similar to remove ingredients during operation.
In case, you have to remove something out of the feed tube, always switch off the
appliance and unplug it before you do so.
Grounding Installation
This is a class I appliance. This appliance must be grounded. In the event of an
electrical short circuit, grounding reduces the risk of electric shock by providing an
escape wire for the electric current. This appliance is equipped with a cord having
a grounding wire with a grounding plug. The plug must be plugged into an outlet
that is properly installed and grounded.
EN
5