Step By Step Instructions; Recharging The Battery - Dentsply Maillefer PROPEX II Mode D'emploi

Masquer les pouces Voir aussi pour PROPEX II:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
6.
Step-by-Step Instructions
A.
Content
Check the content of the equipment before use:
®
- one ProPex
II apex locator
- one charger
- one measurement cable
- two lip clips
- two connection hooks
- two connection forks
- one user manual
B.

Recharging the Battery

®
The ProPex
II is delivered with a rechargeable battery.
®
On ProPex
II a screen indicator shows the level of the battery charge. When this is
flashing, the battery requires recharging. However, it is still functional for several
treatments before the battery shuts down.
Procedure for recharging the battery:
1.
Disconnect the measurement cable
2.
Connect the charger cable to the ProPex
3.
Connect the charger to the mains
Charging screen will appear during battery charging. When the battery image on the
screen stops blinking and turns green, the charging is complete.
Low
Duration of charging: About 12 hours (24 hours after long periods without use).
®
Note: ProPex
II cannot be used while charging.
®
II
Mid
Full
5 / 71

Publicité

Table des Matières
loading

Table des Matières