Refrigerator Storage; Refrigerator Maintenance; Gas Fl Ame Appearance - Norcold N3000 Serie Manuel D'installation Et D'utilisation

Refrigerator Storage

Before the refrigerator is stored for an extended (seasonal) period of time:
- Defrost and clean the interior of the refrigerator.
- To prevent odors and mold in the refrigerator, keep all doors open during storage.
Rotate the hook at door lock 45 degrees and lock it in place by using the strike plate, as
illustrated.
- Disconnect the fan at the rear of the refrigerator. Unplug the connector on the red wire of
the DC power cord, where shown as illustrated.
If the refrigerator is stored for an extended period of time, before start up:
- Make sure there are no obstructions in the vents, the ventilation air pathway, the
burner, the orifi ce, or the fl ue area.
- Reconnect the fan at the rear of the refrigerator. Plug together the connectors on
the red wire of the DC power cord, where shown as illustrated.

Refrigerator Maintenance

Gas fl ame appearance:
While in GAS operation, examine the appearance of the gas fl ame:
- Turn the refrigerator on, select manual gas mode, and coldest temperature setting.
- Open the lower intake vent.
!
The burner box cover can be hot. Wear gloves to avoid burns.
CAUTION
- Remove the burner box cover by removing the screw.
- Look at the gas fl ame [75] (See Art01605).
- The fl ame should be:
- a darker blue color on the inside of the fl ame and a lighter blue color on the outside of
the fl ame.
- a constant shape without fl ickering.
- Contact your dealer or Norcold authorized service center if the fl ame is:
- yellow
- fl ickering or changing shape.
- Make sure the fl ame does not touch the inside of the fl ue tube [76].
- If the fl ame touches the inside of the fl ue tube, contact your dealer or Norcold authorized service center.
- Close the burner box door.
Art02331
76
Art01605
Installation and Owner's Manual 11
Art02362
75