Operating instructions SATA air regulator belt
EN
5. Scope of Delivery
■ SATA air regulator belt with loop for breathing air hose, adjustable buck-
le with padding, two adapter plates with padding and a Protect safety
cap
6. Technical Design
Textile strap
[2-1]
Hip pad left
[2-2]
Adapter plate left
[2-3]
Belt clasp with padding
[2-4]
7.
Technical Data
Description
Max. length
Max. tensile load
Weight
8. First Use
The carrying strap is delivered in an assembled and operationally ready
state.
Check after unpacking:
■ Carrying strap damaged.
■ Scope of supply complete (see chapter 5).
8.1. Ensure operational readiness of carrying strap.
The belt should be adapted to the PPE. Wear protective overall when
adjusting the belt width.
■ Adjust width on the belt clasp.
■ Put on and close carrying strap.
■ Check and possibly correct the width.
■ Check and possibly correct the position of the padded adapter plates.
The carrying strap is operationally ready.
9. Normal Operation
Check the belt for signs of damage and soiling every time before it is
used.
48
Notice!
Notice!
Adapter plate right
[2-5]
Hip pad right
[2-6]
Belt loop
[2-7]
Unit
1.4 m
100 kg
approx. 239 g