Introduction; Indications For Use - Zibra corp ZC-LED50 Manuel D'utilisation

1. INTRODUCTION

Congratulations on the purchase of your new ZC-LED50 Light Source!
This user-friendly LED light source is a high efficiency light source utilizing state-
of-the-art superior illumination technology. It offers a variety of features such as:
6500º K daylight brightness for good color definition
•
Quiet operation
•
Long life, 50,000 hrs.
•
Compact and light weight
•
ACMI port
•
Pulse-width Modulation (PWM) Electrical Dimming
•
In short, you have chosen the best and we would like to make sure you receive the
optimal results with your new LED Light Source by using it correctly.
This Operator Manual will help you to install the device and optimally integrate it
with other components of your system. It will also instruct you how to operate the
LED Light Source and how to keep it clean. It will give you maintenance and
service guidelines as well as recommendations for best performance results.
1.1 INDICATIONS FOR USE: The LED Light Source is used to illuminate the site
of surgery during minimally invasive surgical procedures in arthroscopy
(orthopedic surgery), laparoscopy (general and gynecological surgery) and in
Endoscopy (general, gastroenterological and ENT surgery).The light is
transmitted from the light source through a fiber optic cable and a scope.
LIT168 ZIBRA CORP
(English)
Rev. A
Page 3 of 65