End Of Product Life; Troubleshooting - Zibra corp ZC-LED50 Manuel D'utilisation

10.

END OF PRODUCT LIFE

In accordance with the European Waste from Electrical and Electronic Equipment
(WEEE) directive, we encourage our customers to recycle this product whenever
possible. Disposal of this unit must be performed in accordance with the applicable
local environmental regulations.
In the US a list of recyclers in your area can be found at: http:/www.eiae.org/.
Please contact customer service to issue a return authorization to return product to
manufacturer at the end of product life.
11.

TROUBLESHOOTING

Problem
The power indicator
(refer to 4.1) is not lit.
The power indicator is
lit, but lamp will not
ignite.
LIT168 ZIBRA CORP
(English)
Solution
A. Check that the AC power cord is properly
connected.
B. Check the unit fuses. If necessary, replace.
Turn intensity control knob clockwise to increase light
output intensity
Rev. A
Page 12 of 65