Technical Specifications - Euromate VisionAir MediaMax Manuel Opérateur

User manual
Failure
Fan fails to rotate.
Fan works but the air cleaner
functions poorly or not at all.
The air cleaner cannot be
controlled manually.
-led blinks.
STANDBY
•••• and • leds blink.
The fan speed does not increase
when using the AirMonitor.
The AirMonitor starts while the
atmosphere is apparently clean.
Smells are no longer adsorbed.
No pleasant fragrance.
Fan works but no UV-lights.
7

TECHNICAL SPECIFICATIONS

VisionAir
Dimensions 630 x 620 x 290
mm
Max. built-in height 210 mm
Weight 14 kg
Power consumption 22 W
UV lighting
EN - 9
0508082020/040703/C
Possible cause
Defective fan.
Faulty hardware and/or software.
One or more filters are polluted.
Outlet grids are closed.
The distributor has blocked the control.
Unit is in mode.
PROGRAM
The X-Changer indicates that the filters are
clogged.
The distributor has limited the fan speed in the
software.
Sensor reacts to, for instance, a high or low
humidity or fumes from cleaning agents.
Sensitivity setting of AirMonitor unsatisfactory.
Activated carbon or OdourFree filter is saturated.
FreeBreeze not switched on.
FreeBreeze cartridges are spent.
Defective UV-lights.
AirMonitor analysing the air.
1 2
VisionAir
630 x 1050 x 290
mm
210 mm
24 kg
44 W
Solution
Call in your distributor.
Call in your distributor.
Replace the filters (see section 5).
Open one or more of the outlet grids (see section
4.5).
Call in your distributor.
Push the button on the remote control
PROGRAM
once or several times or wait for 1 minute.
Replace the MediaMax filter (see section 5.2.2).
Call in your distributor.
The sensitivity will adjust itself after some time.
Call in your distributor.
Replace the activated carbon or OdourFree filter
(see section 5.2.3).
Rotate FreeBreeze cartridges anti-clockwise to the
intensity desired (see section 4.4).
Replace FreeBreeze cartridges (see section 5.3).
Call in your distributor.
Wait for 2 minutes and check again.
VisionAir - MediaMax