john deer D100 Série Manuel D'instructions page 14

USAGE
ASSEMBLY INSTRUCTIONS
1
Both side doors can be unzipped and rolled out of the way for easy entry and exit
in hot weather. To open, simply unzip the door, roll the fabric toward the front of
the weather enclosure and secure with the attached buckles.
3
For a more weather-tight closure, use the included plastic cable ties [V] and close
both zippers around the control bar of the accessory. This will ensure that the
zippers move in unison and stay tight.
5
To use the snow blower attachment control arm, reach through the magnetic slit
opening on the door to grab the handle.
2
The right and left front sides of the weather enclosure have zippered openings
for use with riding mower accessories. To use simply open the zipper to insert the
controls for the accessory into the seating area of the weather enclosure.
4
V
When using the enclosure with the snow blower attachment the control arm
should be placed outside of the enclosure as shown.
14
D100 SERIES AND S200 WEATHER ENCLOSURE