Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
- English -
Installation
WARNING
Risk of electric shock – This pump is supplied with a grounding conductor and grounding-type attachment plug. To
reduce the risk of electric shock, be certain that it is connected only to a properly grounded, grounding-type
receptacle.
Important:
●
The unit can be placed within the pond (submerged) or outside of the pond (dry)
●
It is recommened to place the unit horizontally on the ground ensuring its stable position.
●
Do not lift the pump by its power cord. Use the handle to lift and maneuver the pump.
Submerged installation
1. For maximum water flow, it is recommended that the
largest tubing size for your pump is used.
○ If needed, cut the adapter as shown using a hacksaw;
consult packaging for tubing size.
2. Attach the adapter to the pump first, then connect tubing
to the adapter.
NOTE: Tubing is NOT INCLUDED.
3. Attach the other end of the tubing to desired water
feature or spillway.
1.
Tubing
2.
Adapter
Pump
4
Publicité
Table des Matières
