Regulatory Compliance - Acksys PMXNOW0300 Guide D'installation Rapide

Software
Device configuration
Firmware upgrade
SNMP
Operating mode
AP mode only
Network topology
Security
Client/Bridge mode only
Network topology
Security
The unit conforms to the following council Directive:
N°
1999/5/CE
The device has been certified to comply with the European directive and is
appropriately CE marked.
N°
EN 301-489-1
EN 301-489-17
EN 300 328
EN 301 893
FCC
Automatic device discovery
Built in web based utility for easy
configuration from any web browser
(username/password protection)
Yes (via web browser or NDM)
SNMP V1, V2C
AP (Access Point) or Bridge/Client
Infrastructure mode with or without WDS
WEP,
WPA2 with 802.1x authenticator, MAC
address filter, SSID visibility status.
Only WEP is available if WDS enabled
Infrastructure mode
Ad-hoc mode
WEP, WPA-PSK, WPA2-PSK
802.1x EAP-PEAP-MSCHAP V2

Regulatory compliance

Title
Radio and Telecommunications Terminal Equipment
Directive (R&TTE)
Title
EMC for radio equipment 2.4Ghz & 5GHz
Electromagnetic compatibility and Radio spectrum
Matters (ERM); Wideband transmission systems, 2.4
GHz ISM band
Broadband Radio Access Networks (BRAN);
5 GHz high performance WLAN
Complies with Part 15 of the FCC rules (Common
testing standard for most electronic equipment)
contains FCC ID : TK4-05-WLM54AG
WPA-PSK/WPA2-PSK,
-8-
WPA/