Acksys PMXNOW0300 Guide D'installation Rapide page 11

• Device configuration
Click on the « Web » button to access from your web browser to the built-in
web-based interface.
You must choose the Admin user. No password is required by default.
The device operates according to one of two modes: Access Point mode (or
"AP", the default mode) or bridge mode. The banner of each web page
indicates the current mode. WDS mode is an option of the AP mode.
If mode is changed, the device automatically reboots. To change the mode,
enter the menu BASIC
button to select the new one:
You will find a complete description of both modes in the software reference
manual.
The HELP menu, integrated in the web server, also explains all configuration
parameters, with a detailed glossary.
Upon delivery, the default factory settings (common to both modes) are:
- SSID : acksys (broadcasted)
- No security (no WEP, no WPA, no WPA2, no MAC filter)
- 802.11b/g mode
- Radio channel auto selection
QUICKLY EVALUATE AP & BRIDGE MODES
Quickly evaluate the ACKSYS device in AP mode
You need a second P.C (PC2) with a valid Wireless connection.
Setup PC2 Wireless network interface according to the default parameters of
the ACKSYS AP device (802.11b/g, SSID ACKSYS, no security).
WIRELESS, and click on the Wi-Fi mode radio
-3-