Technical Information - Harper XP800 Manuel D'utilisation

2. Open the exhaust-filter cover by pulling on the lip on the cover. Remove the
exhaust filter from the appliance, see Figure 13.
3. Rinse the filter in lukewarm water. Allow it to dry thoroughly.
4. Return the cleaned filter to the appliance. Close the cover, and press until itclicks
into place.
PLEASE NOTE
• Water could penetrate into the appliance if the filters are not thoroughly dry.
This could result in (electrical) damage.

Technical information

Type:
Output:
Power supply:
Protection II:
Product net weight :
The environment
Dispose of packaging material, such as plastic and boxes, in the appropriate waste
containers.
When this product reaches the end of its useful life do not dispose of it by putting it
in a dustbin; hand it in at a collection point for the reuse of electrical and electronic
equipment. Please refer to the symbols on the product, the user's instructions or the
packaging.
The materials can be re-used as indicated. Your help in the re-use, recycling or other
means of making use of old electrical equipment will make an important contribution to
the protection of the environment.
Contact your municipality for the address of the appropriate collection point in your
neighbourhood.
XP800
2200W max
220-240V～50/60Hz
6,5 kg