Function And Features - IFM Electronic efector500 E30064 Notice De Montage

Function and features

The plug is used in conjunction with welding adapters with Aseptoflex
thread (item no. E30052).
1. Protection of the adapter during welding: protection against warp
or damage to the thread by weld slag or similar.
2. Closure following removal of the sensor
1. Protection during welding
• Remove the O-ring (A) (to
avoid head damage during
welding).
• Screw the plug into the
adapter. Avoid mechanical
influence on the sealing cham-
fers.
• Tighten the plug until you can
feel the end stop.
4
A
36