Computer Setup - Samson C01UPRO Manuel Du Propriétaire

Computer Setup

Installing the C01U Pro is a simple procedure that takes just a few minutes. Sim-
ply connect the included USB cable and begin recording. The following sections of
this manual provide detailed instructions on setting up your C01U Pro in Windows
or MAC OS.
Windows
1. The first time you plug the C01U Pro into a USB port, Windows will install the
universal USB drivers for that port.
2.
To set the C01U Pro as your default input/recording device, or to change
its settings, open the Control Panel, Hardware & Sound settings, then click
SOUND. Under Recording tab, you can select the Samson C01U Pro from the
list of devices and press the Set Default button to set it as the default audio
input device.
3. To set the gain of the microphone, click the Properties button, and then select
the Levels tab. Slide the control until the desired level is reached. If you Find
that the microphone red clip LED is lighting frequently, turn this control down
until the LED no longer flashes red.
4. To set the headphone level, select the Playback tab, open the C01U Pro
Properties, then select the Level tab and adjust the computer's Master Volume
slider.
5. To turn direct monitoring on or off, open the Speaker Properties, select the
Level tab, then click the Microphone speaker icon.
Apple MAC OSX
1. To start using the Samson C01U Pro, simply plug it in. The LED will illumi-
nate to indicate it is receiving USB power. The MAC will recognize the USB
audio device and automatically install a universal driver.
2. To select the C01U Pro as the computer's audio input, open System Prefer-
ences from the dock or the main Apple Menu.
3. Next, open the Sound preferences, choose the Input tab and select C01U
Pro. To set the gain of the microphone, adjust the Input volume slider at the
bottom of the Sound dialog box. The Input Level meter will show the recording
level.
4. To set the playback volume, click in the Output tab and select C01U Pro,
adjust the Output volume slider at the bottom of the Sound dialog box.
5. To turn direct monitoring on or off, open the Audio/MIDI Setup utility located
in the Utility folder inside the Applications folder. Select the C01U Pro, then
click the check-box in the Thru column in Audio/MIDI Setup.
EN
FR DE ES IT
7