Quick Start - Samson C01UPRO Manuel Du Propriétaire

Quick Start

1
Affix the C01U Pro to the tripod base or microphone stand
using the included microphone swivel.
Position the microphone facing the sound source that you will
be recording.
2
Connect the included USB cable
into the USB socket on the bottom
of the microphone and into an
available USB port on your
computer.
3
4
Launch your audio software and select
the C01U Pro as the audio input and
output devices.
Set up a mono record track in your
software.
EN
FR DE
Next, connect your headphones to the headphone
output located on the front of the C01U Pro. See
the section on "Computer Setup" on page 6 to
learn how to adjust the headphone output level.
ES IT
My instrument is connected with:
Samson C01U Pro
Mono 1
5