Intended Use; Technical Data; Operating Elements And Connections; Opening The Gong - Rev Ritter Vivo Mode D'emploi

Dear customer,
Thank you for buying our high quality radio gong Vivo. Please read the following
operating instructions through carefully before starting the gong.

1. Intended use

The gong is only designed to be used with the appropriate batteries. never con-
nect it to other voltages.

2. Technical data

WIreLeSS CHIMe
Dimensions:
operating temperature:
Batteries:
operating frequency of radio module: 433,92MHz
Loudness:
WIreLeSS Key BUTTon -MoDULe
Dimensions:
Batteries:
also suitable for use outdoors (IP44)
The gong conforms to the applicable european Ce guidelines.

3. Operating elements and connections

Fig. 1
(1) Volume controller (VoL)
(2) expansion slot for sound module or USB-module
(3) Battery compartment for 1.5 V battery (AA Mignon)
(4) rotary switch to select the house code
(5) Sliding switch  for selecting the bell mode
Fig. 5
(6) Battery compartment for 1.5V batteries (AAA Micro)

4. Opening the gong

To open the gong, release the cover from the base (Fig. 2), if necessary use suita-
ble work tools (e.g. screwdriver) to push in the latches of the cover.
80 x 130 x 46mm
0° - 40°C
3 x 1.5V AA Mignon (not included)
max. 80dB (A)
40 x 104 x 28mm
2 x 1.5V AAA Micro
13