JRG Sanipex MT Notice D'utilisation Et D'entretien page 152

E
Please note:
Remove the battery from the pump prior to changing any accessories in order to prevent
any accidental start-up.
4.2 Explanation of applications
All process units given in our catalogue can be used together with our electro-hydraulic
pumps.
The units are not suitable for continuous operation. After about 100 working cycles in succes-
sion, the device should be shut down for at least a quarter of an hour to provide time for the
device to cool down
Please note:
Do not use the device too intensively; this may lead to excess temperature in the device and
cause damage to it.
Please note:
The operation of electric motors can cause sparks which may put inflammable or explosive
substances on fire.
Please note:
The electro-hydraulic unit must not be used in heavy rain or under water.
The device can be used in a temperature range from -12 °C to + 40 °C, both indoors and
outdoors.
152