Operating The Device - JRG Sanipex MT Notice D'utilisation Et D'entretien

3.2 Description of information displayed
In connection with the electronic control unit, the LED (7) is used to inform about the status of
the tool and the battery. An explanation of the various data displayed can be found in Chapter
2.6. Check the charge level of the battery (1) before you start working. A low charge level will be
indicated on the LCD display (6).
4. Notes on proper use
The pump can be transported and used in any position.
4.1

Operating the device

1. Connect the coupling sleeve of the hydraulic hose HSOEL2 (4) to the coupling plug on the
pump.
2. Select the required process unit plus accessory.
3. Connect the selected process unit to the pump with the help of the hydraulic hose (4) via
quick coupling.
Please note: Do not use the pump without process unit.
Please note: Check oil level and fill oil if necessary before you start working (Chapter 2.4).
4. Insert the battery and the replacement battery (if available) in the mounts provided for
them (Chapter 2.2).
5. The pump is now ready for operation. The LCD display (6) is activated.
6. Select Working Mode 1 / Press Function by pushing the program selector switch (5).
7. The operation is initiated by activating the feed function of the forward and return button.
E
151