Publicité
Les langues disponibles
Les langues disponibles
•
Separate the stainless steel part from the transparent part applying a 1/4 turn to the
n
right
.
•
Remove the motor unit
n
•
Remove the used worm and replace it with the new one
n
•
Take care to reassemble the unit in this order: the big washer first, followed by the
n
worm and finally the small washer
•
Put the motor unit back in position
n
•
Assemble the stainless steel part onto the transparent part, applying a 1/4 turn to the
n
left
.
•
Tighten the screw at the back of the corkscrew
n
The corkscrew is ready for use.
Cleaning
•
Do not immerse the corkscrew in liquids or place it in the dishwasher. Do not use
n
when your hands are wet.
•
No detergent or other cleanser should be used for cleaning it.
n
Advice
•
Keep the corkscrew and its packaging out of children's reach.
n
•
Do not place the corkscrew near a heat source. Protect from dampness and frost.
n
What should you do if the corkscrew does not work?
•
Recharge the corkscrew (refer to the "Charging batteries" paragraph).
n
•
Check that the transformer is in good running order; its red diode should light up
n
when it is plugged into the mains power.
.
.
.
GB
.
.
Publicité
