Important - Cegla RC-CORNET PLUS Notice D'utilisation

INSTRUCTIONS Assembly
I
Please wash your hands before assembly.
a. Connect the one way valve with the adapter.
b. Connect the mouthpiece centered with the adapter.
For using the device please follow the instructions
for use (see pages 18 and 19).
c. Remove the cleaning aid from the valve tube.
d. Connect the valve tube with the adapter and make
sure that the centering dot clicks into the cut-out of
the adapter.
e. Guide the piece into the body. Make sure that the
arrow on the adapter and on the body are aligned.
f. Check the valve tube position. It should not be kinked.
g. Reattach the body lid.
COMBINED THERAPY / NEBULIZER CONFIGURATION
Combining RC-Cornet
nebulizer improves delivery of your nebulized medication
and reduces the total treatment duration. Furthermore the
effectiveness of both therapies is improved.
Connect the RC-Cornet
first attach the nebulizer in a straight direction to the adap-
ter. To detach the nebulizer from the adapter, pull it straight
out and off.
IMPORTANT: Please do not "shake" the nebulizer. This may
damage the device.
Please always use setting 1 of RC-Cornet
therapy. This setting opens your airways and stabilizes them.
Please inhale and exhale only through the device. The treatment
duration corresponds with the nebulizer period.
NOTE: The NEBULIZER SET is available for non ISO ne-
bulizers. The nebulizer and the NEBULIZER SET are not
included. They can be purchases separatly. For more infor-
mation visit www.cegla.de
PLUS therapy with a standard ISO
®
PLUS to your nebulizer. To do so,
®
PLUS for combined
®
EN | 23