Philips HQ6730 Mode D'emploi page 14

EnglisH
16
may take several weeks before optimal shaving
performance is restored.
4 Remove the hairs with the brush supplied.
5 Put the shaving heads back into the shaving unit.
Put the retaining frame back into the shaving
unit, press the wheel and turn it clockwise.
6 To prevent long hairs from obstructing the
shaving heads, remove the shaving heads once a
month and clean them with the brush supplied.
Cause 3: the shaving heads are damaged or worn.
,
Solution 3: replace the shaving heads. See
,
chapter 'Replacement'.
3 The shaver does not work when the on/off
button is pressed.
Cause 1: the batteries are empty
,
Solution 1: recharge the batteries. See chapter
,
'Charging'.
Cause 2: dried-up shaving gel/lotion is blocking
,
the shaving heads.
Solution 2: clean the shaving heads thoroughly.
,
See chapter 'Cleaning and maintenance'.
Cause 3: the shaving heads are damaged.
,
Solution 3: replace the shaving heads. See
,
chapter 'Replacement'.
4 The cover of the cartridge compartment
cannot be closed
Cause 1: the cartridge has not been inserted
,
correctly.
Insert the cartridge correctly. It only fits
,
properly into the shaver if the white side of the
pump is pointing upwards.
Cause 2: the cartridge has not been pushed far
,
enough into the shaver.
Solution 2: press the cartridge until it locks into
,
position with a click.