Notes On Digital Operation - Trix RAm Série Mode D'emploi

Notes on digital operation

• The first time the locomotive is used in a digital system
(Selectrix or DCC), the decoder must be set for this digital
system. To do this, the decoder must be programmed
once in this digital system (Example: changing an
address).
• The setting done at the factory does not permit operation
with opposite polarity DC power in the braking block.
If you want this characteristic, you must do without
conventional DC power operation (CV 29 / Bit 2 = 0).
• Function F2 and the following functions are only on when
Function F1 is turned on.
11