Preparing For Transportation; Weee Information - Argos PVAC Manuel De L'opérateur

Argos Technologies P-Vac™ Portable Vacuum System — Operator's Manual

Preparing for Transportation

This is a special mode which prevents the P-Vac from accidentally being switched
on during transportation. An electronic switch within the unit prevents it from
powering up. The transportation mode is enabled by turning the unit on, then press
and hold the power button for seven seconds. When both Battery Status and Vacuum
Status LEDs rapidly flash Red, shipping mode has been entered. Shipping Mode can
only be disabled by connecting external power. If Shipping Mode was enabled with
external power connected then this must first be disconnected for a moment before
re-connection to remove shipping mode. When in Shipping Mode the power button
is ineffectual.

WEEE Information

This equipment is labeled with the crossed out wheeled bin
symbol to indicate that the equipment must not be disposed of
with unsorted waste. It is your responsibility to correctly dispose
of the equipment by handing it over to an authorized facility for
separate collection and recycling. It is also your responsibility to
decontaminate the equipment in case of biological, chemical or
radioactive contamination. So as to protect from health hazards the
persons involved in the disposal or recycling of products.
For more information about where you can drop off your waste equipment, please
contact your local dealer from whom you originally purchased the product.
By doing so, you will help to conserve our natural resources and you will ensure that
your waste products are recycled in a matter that protects human health and protects
the environment.
Thank you.
10