Pulse Mode; Ingredient Cup; Soft Start ® Blending Feature - KitchenAid KSB565 Guide D'utilisation Et D'entretien

4. To turn off the CRUSh ICE feature
press OFF. The Blender is now ready for
continuous operation.
5. Before removing the pitcher assembly,
unplug the power cord.

PuLsE MoDE

Your KitchenAid Blender offers PULSE
®
MODE, which allows a "Pulse-at-any
Speed" feature.
NotE: PULSE MODE will not work with
the CRUSh ICE feature.
1. Before operating the Blender, make
sure the pitcher assembly is properly
positioned on the Blender base.
NotE: If a gap exists between the locking
collar and the base, the pitcher might not
be locked into the locking collar or the
collar is not positioned properly on the
Blender base. See Blender Assembly for
further instructions.
2. Put ingredients into pitcher, and firmly
attach lid.
3. Press PULSE MODE. The indicator light on
the button will blink to indicate that all
five speeds are in the PULSE MODE.
using the Blender
4. Select a speed button. Press and hold
5. To turn off the PULSE MODE feature,
6. Before removing the pitcher assembly,

Ingredient cup

The 2 oz. (60 ml)
ingredient cup can be
used to measure and add
ingredients to the pitcher. Remove cup
and add ingredients at STIR, ChOP or MIx
speeds. When operating at higher speeds,
with a full pitcher or with hot contents,
stop the Blender and then add ingredients.
soft start
The Soft Start
automatically starts the Blender at a slower
speed to pull ingredients into the blade
then quickly increases to selected speed
setting for optimal performance.
NotE: The Soft Start
only works when a speed is selected from
the OFF mode and does not work with the
PULSE MODE or CRUSh ICE features.
11
for the desired length of time. Both
the speed button and PULSE MODE
indicators will stay lit when pulsing
at the selected speed. When button
is released, the blending will stop,
but the Blender will remain in PULSE
MODE and the PULSE MODE indicator
will return to blinking. To pulse again
or at another speed, simply press and
hold the button of the desired speed.
press OFF. The Blender is now ready for
continuous operation.
unplug the power cord.
Blending feature
®
blending feature
®
blending feature
®