Guarantee - Dometic WAECO ColdMachine 54 Notice D'utilisation

ColdMachine
8.2 Accumulator function
The accumulator function ensures that cold energy is stored automatically
(up to 8 hours) if enough electrical power is available, for example when sup-
plied by a mains adapter.
Stored cooling power is discharged
automatically when the switch-off voltage is reached (see the table on
page 40)
or manually by pressing the discharge button (fig. 1 A2 or fig. 2 4,
page 3).
Note
I
The cold accumulator can only be discharged manually if it was
fully charged beforehand.
The accumulator is automatically charged if,
the restart voltage is exceeded
or the accumulator is empty and you switch the device off and on
again using the control button(fig. 2 6, page 3, does only function on
VD-06).
Caution!
a
When you are discharging the accumulator, although there is an
external supply of power – for example to avoid operating noise
from the compressor – use the main switch to switch the unit off
(fig. 1 B1 or fig. 2 6, page 3).
Note
I
Please remember: Low internal temperature = high current
consumption!
9

Guarantee

The statutory warranty period applies. If the product is defective, please
return it to the WAECO location in your country (see the back of the
instruction manual for the address) or to your dealer. For repair and
guarantee processing, please include the following documents when you
send in the device:
A copy of the receipt with purchasing date
A reason for the claim or description of the fault
Guarantee
49