Setting The Unit; Power Indicator; Top Cover; Bass Boost Control - Pioneer PRS-D220 Mode D'emploi

Setting the Unit

• To adjust the switch, use standard tip screwdriver if needed.

Power Indicator

The power indicator
lights when the power
is switched on.

Bass Boost Control

You can select a bass boost level from
0, 6, 9 and 12 dB.
For instruction of connecting the bass
boost remote control to the amplifier,
see the "Connection Diagram" section.
3

Top Cover

Before setting up the unit, unfasten the
screws with a 4 mm hexagonal wrench
and remove the top cover.
BFC (Beat Frequency
Control) Switch
BFC switch is on the bot-
tom of the unit. If you hear
a beat while listening to an
MW/LW broadcast with
your car stereo, change the
BFC switch using a small
standard tip screwdriver.