Horizon Fitness ELITE IC7 Guide De Montage page 4

ASSEMBLY STEP 1 & 2
3
4
1 2 5
1 Attach the rear stabilizer (1) to the frame using 2 flange
nuts (3), 2 washers (4) and two carriage bolts (2), and
secure firmly using the adjustable wrench (5).
6
HZ14_AG_Elite_IC7_Rev1_2.indd 6-7
3
4
5 2 6
2 Attach the front stabilizer (6) to the frame using 2 flange
nuts (3), 2 washers (4) and two carriage bolts (2), and
secure firmly using the adjustable wrench (5).
ASSEMBLY STEP 3 & 4
8
5
7
3 Thread the left pedal (8) that has "L" on the spindle to the
left side arm of the cycle using the adjustable wrench (5).
Please note that the L pedal is left-hand threaded which
needs to be turned counter clockwise to tighten.
Thread the right pedal (7) that has "R" on the spindle
to the right side arm of the cycle using the adjustable
wrench (5). Please note that the R pedal is right-hand
threaded which needs to be turned clockwise to tighten.
9
B
A
4 Attach console cable (A) to console cable (B). Insert
handlebar (9) into bike frame.
8/11/14 10:09 AM
7