NewAge Products 65900 Manuel D'installation Et Fonctionnement page 7

To access the rotisserie injector, begin by
7
removing the 6 bolts holding on the back panel
on rear of grill.
Locate the orifice location inside back of
9
5
rotisserie (C). Apply pipe dope to the propane
injector thread and hand tighten into position.
C
Re-attach back panel following reverse order
11
5
of Step 9 and 10.
12
www.newageproducts.com
8
5
Remove the back panel and set aside.
10
5
Finish tightening using a 6mm open wrench.
Re-insert the burners and attach the bolts (A)
12
securing the burners with the bolts.
5
A
13
Reinstall the grill grates, ceramic briquette
5
trays, and rotisserie.
3
www.newageproducts.com
13