Teckentrup car Teck 12.1 Notice De Montage Et D'utilisation page 33

EC Declaration of Conformity
In compliance with EC directives
Low Voltage Directive
2006/95/EB with amendments
Electromagnetic Compatibility
2004/108/EC with amendments
We, the company
DOORTEC Antriebs GmbH
Industriestr. 7
D-53842 Troisdorf
declare, with sole responsibility, that the product
named as follows
CarTeck 12.1
to which this declaration makes reference, was
tested according to or conforms to the following
standards and directives.
European standards:
EN 61 000 - 6 -3
EN 61 000 - 6 -2
EN 60 335 - 1
EN 12 445
EN 12 453
DIN standards:
EN 60 335 - 2 -103
Directives:
ASR A1.7
Walter Kentenich
Troisdorf on 01.01.2012
EC Declaration of Conformity
In compliance with EC directives
Machinery Directive 2006/42/EC
for machines intended for installation
We, the company
DOORTEC Antriebs GmbH
Industriestr. 7
D-53842 Troisdorf
declare, with sole responsibility, that the product
named as follows
CarTeck 12.1
to which this declaration makes reference, was
tested according to or conforms to the following
standards and directives.
European standards:
EN 12 100 - 1
EN 12 445
EN 12 453
DIN standards:
Richtlinien:
ASR A1.7
Important:
The door to which this door operator is to be in stalled
may not be put into operation until it is certified that
the door conforms to the provisions of the directive
2006/42/EC.
Walter Kentenich
declarations 33
Troisdorf on 01.01.2012