Connection; Connexions; Anschlüsse; Aansluitingen - Accuphase E-213 Mode D'emploi

Amplificateur stéréo intégré
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

CONNECTIONS
Notes
For connection between the DAC-10 and digital equipment, use a 75-ohm coaxial cable or
optical fiber cable.
For analog input/output connections, use shielded audio cables and take care not to mix up
left and right channels.
Do not make connections to a component with balanced and unbalanced cables at the
same time. Otherwise ground loops may occur, which can cause noise.
Option board installation example shown in illustration
OPTION: Digital Input Board
    ●
Tuner
output level
station
5
4
6
3
7
fm stereo tuner
2
8
model T-109V
1
9
0
10
STEREO
 0 1 2 3 4 5
SELECTIVITY
NORMAL
SIGNAL
ANALOG OUT
See "Option Boards"
for more information
on this connection.
75-ohm coaxial
Optical fiber
cable
cable
DIGITAL OUT
STEREO
SELECTIVITY
NORMAL
CD player, DAT recorder,
MD recorder, or other
digital component
WARNINGS
This set relies on cooling with a natural flow of air between the ventilation
holes on the top and bottom. When installing the set, leave at least 10 cm of
space at both sides, the top and the back to allow for normal ventilation.
Do not place any object containing liquid (vases, flower pots, bottles with
cosmetics or chemicals, etc.) on top of the unit. If a spill occurs, there is a risk
of fire and electric shock.
If there is a problem with the unit or if malfunction occurs, always disconnect
the power cord from the AC outlet! This is absolutely essential, because simply
setting the power switch to OFF will not completely separate the unit from the
AC source.
CAUTION :
CD player
mm
B
compacr disc player
ANALOG
OUTPUTS
Audio cables with
RCA-type plugs
MEMORY
MH
Z
CH
METER
DIGITAL
INPUTS
COAXIAL
OPTICAL
model DAC-10
MEMORY
MH
Z
CH
METER
SIGNAL
Before making connections, be sure to switch
the power to all components off.
[DAC-10]
DP-65V
Use shielded cables for audio
Balanced
connections (2-conductor
cables
shielded cables for balanced
connections).
LINE IN
LINE OUT
STEREO
MEMORY
MH
Z
CH
SELECTIVITY
METER
NORMAL
SIGNAL
Recorder
2
Speakers
Left
Right

Publicité

Table des Matières
loading

Table des Matières