Kodak SMILE Classic Guide De L'utilisateur page 6

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

c. When you take your first photo after
loading the ZINK® paper,
the blue calibration sheet will be
slowly ejected from the
printing slot. Your photo will print
after the calibration sheet finishes.
NOTE: Please make sure not to push
the paper in too far or else the paper
could jam or cause misprinting issues.
3. Insert a microSD™ card into the
corresponding slot on the side,
located directly underneath the charging port. The KODAK SMILE
Classic supports microSD™ cards up to 256GB.
4. Download the KODAK
Classic 2-in-1 application
from the Google Play™
or Apple® App Store®.
The KODAK SMILE
Classic works without
downloading anything,
but the app provides a lot
of unique and fun features
for your new camera!
10 | EN
TAKING PICTURES WITH THE KODAK SMILE CLASSIC
1. Turn the camera on by sliding the power latch toward the rear of
the camera so that the viewfinder pops up. You will hear a musical
tune and the LED indicator on the side of the camera will blink red,
then turn solid green when the power is on.
2. If you want to set a 10-second timer, press the timer button on top
of the camera, next to the shutter button. The camera flash will
blink to count down the seconds, and the camera will also play a
sound before taking the picture.
3. Look through the viewfinder to line up your picture, and then press
the shutter button on top of the camera.
4. If you're taking pictures in a low-light setting, the KODAK SMILE
Classic will auto-detect the light level and use the strobe flash
EN | 11

Publicité

Table des Matières
loading

Table des Matières