Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Product overview
5
4
1 On/off switch
2 Battery compartment cover
3 Locking block
Inserting/changing the batteries
• Remove the battery compartment cover.
• Insert two AA batteries. Observe of the polarity markings on the inside of the battery
compartment cover.
• Close the battery compartment.
Change the batteries as soon as the laser power significantly decreases or the laser
can no longer be switched on.
Power ON/OFF
• Slide the switch to the right to activate the laser.
• Slide the switch to the left to deactivate the laser.
The laser automatically deactivates when you tilt the housing too heavily.
Care and cleaning
Never use aggressive detergents, rubbing alcohol or other chemical solutions, as
these can damage the casing or even impair the function.
Do not immerse the product in water or other liquids.
• Use a dry, lint-free cloth to clean the product. In case of stronger soiling, you can use a damp
cloth.
• Store and transport the product in the provided storage bag.
1
2
3
4 Tripod thread
5 Laser aperture
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product according to
the relevant statutory regulations.
Remove any inserted batteries and dispose of them separately from the product.
b) Battery information
You as the end user are required by law (Battery Ordinance) to return all used
batteries/rechargeable batteries. Disposing of them in the household waste is
prohibited.
Contaminated (rechargeable) batteries are labelled with this symbol to indicate that
disposal in the domestic waste is forbidden. The designations for the heavy metals
involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable)
batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to collection points in your municipality, our
stores or wherever (rechargeable) batteries are sold.
You thus fulfil your statutory obligations and contribute to environmental protection.
Technical data
Power supply ................................ 2x AA battery
Range ........................................... min. 12 m
Accuracy ....................................... ±0.6 mm (at 1 m)
Operating time .............................. min. 20 h
Laser class ................................... 2
Laser output power ....................... <1 mW
Laser wave length ........................ 630 – 670 nm
Tripod socket ................................ 6.35 mm (1/4")
Protection type .............................. IP54
Operating temperature ................. -10 to +40 °C
Storage temperature ..................... -20 to +60 °C
Dimensions (L x W x H) ................ 80 x 51 x 83 mm
Weight .......................................... 262 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in
electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication reflects the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE.
*1712610_v2_0119_02_IPL_m_en
Publicité
Table des Matières
