The Programming Menu; Weekly Programming - LEGRAND 674 56 Notice D'emploi

5 - Programming

The Programming menu

■
Using the Programming menu you can customise the following modes
of operation of your system:
• Weekly
With the weekly mode your system works automatically following the
programming set. You can choose from three programs which you
can customise. Inside the programs the temperature can be differen-
tiated over 24 hours and for each day of the week as you require.
The Example program is preset but can be modified.
• Scenarios
The Scenario mode lets you set different temperatures in various
zones of the system with a single command. For example, if when
cleaning you intend to open windows in some rooms you can set a
lower temperature (or higher for cooling) to avoid wasting energy.
16 Winter scenarios and 16 Summer scenarios can be programmed.
• Holiday
The Holiday mode can select a particular daily profile for a set period.
The program is run until the programmed date and time, after which
the weekly program chosen will be reset.

Weekly programming

✔
Up to 3 weekly programs can be created for each of the two functions
(heating and cooling).
To select the weekly program to be customised:
In Programming menu select
Weekly
Press the key to confirm
Select the program to be
modified
The following functions are available
for the program selected:
Use the keys to select the function required
64
Weekly
Scenarios
Holiday
Example
Week no.2
Week no.3
Modify
Modify
Copy from
Visualize
Erase