Set the mode of operation
✔
This operation sets the system mode of operation:
•
Summer
= cooling;
•
Winter
= heating.
In the Setup menu select Sum-
mer/winter with the
Press the
key to confirm
The display shows the window indi-
cating the mode of operation in use
(Operation: Winter)
To change the system mode of ope-
ration press
To end the programming and return
to the first window keep the
pressed
Before switching, perform all the necessary operations on the
hydraulic system to ensure that it works correctly.
After the switching the system is set in Antifreeze/Heat protec-
tion mode.
Temperature
Summer/winter
Date/time
keys
Remote control
Operation:
Winter
Summer
Operation:
Winter
key
Winter
Set the date and time
✔
For your system to work correctly the date and time set must be
correct.
In the Setup menu select Date/time
with the
keys
Press the
key to confirm
Use the number keypad to enter the
time and date:
- the
keys let you change to the
previous or next figure
- the
keys let you change line,
from time to date and vice versa
Confirm by pressing
To end the programming and return to the first window keep the
key pressed
59
4 - Customisations
Temperature
Summer/winter
Date/time
Remote control
Time
0
6 : 2 7
Date
0 1 / 1 0 / 0 8
Time
1
1 : 3 0
Date
0 5 / 1 1 / 0 8