Osd Cctv Menu Controls; Picture Mode - Urmet 3000/328 Manuel De L'utilisateur

2.2

OSD CCTV MENU CONTROLS

Select the menu using the MENU [F] button in order to access the Menus and Submenus and their functions
Use of the buttons
Selection of the Menus
In order to show the main Menu, press the [F] button.

In order to select the Menus of the vertical bar, press the [B-C] buttons.

In order to select each single Menu, press the [E] button.

In order to change a value (once the option is selected), press the [D-E] buttons.

In order to confirm the selection, press the [F] button.

In order to exit from Menus and Submenus, press the [F] button.

2.2.1 PICTURE
Selecting the icon, the following screen will appear (depending the signal type):

PICTURE MODE

It allows to change the image settings among the following:" Mild - User - Dynamic - Standard". Press "D and E" buttons
to select the desired option
Selecting the User mode, it possible to modify or display the following parameters:

CONTRAST: It allows to change contrast between white and black areas of the image. A clear resolution of
good white, black and grey gradation is achieved by a proper setting of contrast. Press "D" and "E" buttons to
change the values of this parameter.

BRIGHTNESS: It allows to change image brightness, according to ambient light. Press "D" and "E" buttons to
change the values of this parameter.

COLOR: It allows to display the color mode of the image.

SHARPNESS: It allows to display the image sharpness parameters.

HUE: Only used in NTSC system.
DS3000-003 13