Supported Dvi Resolutions; Mobil Tv Instructions - Durabase L24H472S4V Mode D'emploi

56Hz 60Hz
640x400
640x480
800x600
832x624
1024x768

Supported DVI Resolutions

1152x864
When connecting devices to your TV's connectors by using DVI converter cable(DVI to HDMI cable - not
1152x870
supplied), you can refer to the following resolution information.
1280x768
1360x768
1280x960
1280x1024
1400x1050
1440x900
1600x1200
1680x1050
1920x1080
66Hz 70Hz 72Hz 75Hz
English - 45 -
Mobil TV Instructions
Switching the TV On Using 12 Volt
1. Connect the cigarette lighter plug cable into the cigarette lighter socket of your car.
2. Plug the other side of 12 volt cable into DC 12 socket on the back side of the TV. Then the standby LED
will light up.
3. Press the Standby button, Programme +/- buttons or a numeric button on the remote control or press the
middle of the control switch on the TV in. The TV will then switch on.
4. Adjust the antenna position for better reception or reinstall TV channels if necessary.
Switching the TV Off
1. Press the Standby button on the remote control or press the middle of the control switch on the TV in and
hold it down for a few seconds, so the TV will switch into standby mode.
2. Unplug cable connectors and power plugs.
ATTENTION: 12 V Input :
V+
V+
V-
V-
English - 46 -