Connections With External Device - Pioneer SBX-B30 Mode D'emploi

Masquer les pouces Voir aussi pour SBX-B30:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
4 Place the TV in its final position.
Caution
• Pioneer is not responsible for any accidents or
damage that result from improper installation/
mounting, incorrect use, modification, disaster,
etc.
• Place the TV in the center of the unit.
• Place the TV so that its stand does not stick out
over the unit.
• Place the unit so that it does not extend out over
the TV rack, shelf etc.
• Refer to the operating instructions for your TV for
methods to prevent the TV from tipping over or
falling. Do not attach any parts intended to prevent
the TV from tipping over or falling (such as belts
etc.) to this unit. Doing so may cause damage to
the unit, or result in fire or electric shock. Doing
so may also mean the TV can tip over or fall, and
being damaged or causing injury.
5 Connect the power cord.
Installing and Connecting the Unit
Note
• Some TVs have settings for digital audio output. For
details, see the operating instructions for your TV.
• Set audio output from the built-in speakers of the
TV to OFF. If this cannot be set, set the TV volume
to the minimum level.
Connections with
external device
You can connect a playback device (BD, DVD,
or CD player) with an optical digital audio
output or a satellite broadcast tuner or other
device with a coaxial digital audio output to the
unit to enjoy the sound of that device.
Optical digital audio cable
(commercially available)
BD player or other device
Satellite broadcast tuner,
cable TV tuner, or other
device
Digital audio pin cable (commercially available)
Note
• An optical digital audio cable with a square plug
can be connected to this unit.
• When an MPEG2-AAC (digital broadcast) signal
is input to a digital audio input terminal, sound
not be output. If sound is not output, switch the
audio output of the device connected to the digital
audio input terminal to PCM. For the switching
procedure, refer to the operating instructions for
the connected device.
• Some connected devices have settings for the
digital audio output. For details, see the operating
instructions for the specific playback device.
9
En

Publicité

Table des Matières
loading

Table des Matières